Ubuntu Wiki

Keep failed tests please at the top of each result table. In general keep success and fails grouped together (the former at the bottom and the latter at the top of each table).

Case 0.0 / Ethernet / DHCP

1. Plug in ethernet cable
2. Icon should form cycle
3. Icon should show "plugged-in"
4. Click Widget and check shown data
5. Unplug ethernet cable
6. Icon should show "unplugged"

Case 0.1 / Ethernet / Manual

1. Manage connections; and add a new wired connection with manual IP
2. Check that icon shows "plugged-in"
3. Check that the connection uses that IP (ifconfig)
4. Unplug cable and plug it in again; is the manual IP still being used.
5. Restart the computer; is the settings remembered and gets used

Case 1.0 / Wireless / DHCP

1. Ensure WiFi network is not protected

2. Click Widget

3. Select WiFi network to connect to

4. Icon should form cycle
5. Icon should form antenna
6. Click Widget and check shown data

7. Move further away from AccessPoint

8. Ensure signal strength display gets updated after some time

Case 1.1 / Wireless(protected) / DHCP

1. Use same test-procedure as in case 1.0
2. Do you get asked about the connection-details for the network and gets connected to the network
3. After being disconnected from the network is your connection details remembered (clicking the network next time works without providing password an extra time)

note: Please list which encryption is used under details

Case 2.0 / VPN / DHCP

1. Can anyone get this to work?