HardwareSupportComponentsVideoCardsPoulsbo

Revision 65 as of 2010-07-05 21:39:19

Clear message

This page details support for the Intel GMA500 "Poulsbo" video hardware in various Ubuntu releases. The table below shows the current status of the driver.

2D graphics

3D graphics

Hardware Video Acceleration1

Lucid (10.04)

Excellent

Beta Available

Beta Available

Karmic (9.10)

Excellent

Excellent

Excellent

Jaunty (9.04)

No longer supported and/or recommended

Intrepid (8.10)

No longer supported and/or recommended

Hardy (8.04)

Partial support with pre-installed version

Lucid (10.04)

There are preliminary testing on how to install an appropriate driver, you can follow the discussion at http://ubuntuforums.org/showthread.php?t=1229345.

As reported on http://code.google.com/p/gma500/wiki/PPARepository, for the 2D support, you can proceed with following steps:

Open a terminal and type:

sudo add-apt-repository ppa:gma500/ppa && sudo apt-get update

this command will add 'GMA500 PPA' repository and update database

sudo apt-get install poulsbo-driver-2d poulsbo-driver-3d poulsbo-config

after your system will be installed with all needed packages, you must restart your netbook.

Warning /!\ To try the Beta with 3D graphics and Hardware Video Acceleration support:

Open a terminal and type:

sudo add-apt-repository ppa:gma500/fix && sudo apt-get update

this command will add 'GMA500 Fix' repository and update database

sudo apt-get install poulsbo-driver-2d poulsbo-driver-3d poulsbo-config

after your system will be installed with all needed packages, you must restart your netbook.

Warning /!\ Use following notes for your models:

  • 3D is broken in stable version (shadowFB enabled, compiz will be removed).
  • On Asus and Sony Vaio add the following workarounds:

    sudo nano /etc/default/grub

    find correct line and update to below

    GRUB_CMDLINE_LINUX_DEFAULT="quiet splash mem=2000mb acpi_osi=Linux"

    Then update your grub config

    sudo update-grub
  • On Acer 751h to fix battery status add to session startup:

    cat /proc/acpi/battery/BAT1/info

Karmic (9.10)

Open a terminal and type:

sudo add-apt-repository ppa:gma500/ppa && sudo apt-get update

this command will add 'GMA500 PPA' repository and update database

sudo apt-get install poulsbo-config poulsbo-driver-2d poulsbo-driver-3d psb-firmware psb-kernel-headers psb-kernel-source

after your system will be installed with all needed packages, you must restart your netbook.

Warning /!\ Then new kernel have been installed, please proceed with following step in case of issue

sudo dpkg-reconfigure psb-kernel-source

Intrepid (8.10) and Jaunty (9.04)

The drivers for the Poulsbo chipset are shipped in the ubuntu-mobile PPA.

Add the ubuntu-mobile PPA

Edit a file called /etc/apt/sources.list/psb.list, and add the following line to it: deb http://ppa.launchpad.net/ubuntu-mobile/ppa/ubuntu YOUR RELEASE HERE main

You may also wish to add the key to the keyring by following the instructions here.

Which kernel are you running?

If you are using a kernel that you have compiled yourself, or are not using the latest kernel provided by either Intrepid or Jaunty, install the psb-kernel-source package (and make sure the headers for your kernel are available!) and then remove psb-modules.

Install packages

Install poulsbo-driver-2d if you only require 2D, and poulsbo-driver-3d if you also require 3D acceleration to work. Make sure your user is a member of the video group before using 3D.

Hardy (8.04)

The Poulsbo hardware is not supported in the community version of Ubuntu. However, it is reputed to "just work" on Hardy version shipped by a netbook manufacturer.

For example, the support for GMA 500 hardware by Dell Ubuntu Hardy 8.04 is provided by the following repository

deb http://dell-mini.archive.canonical.com/updates hardy-dell-mini public

Contribution

The Ubuntu community is a great example of free software community in action, and is arguable one of the greatest examples of free software community in the world. To make Ubuntu better, You would like to take a look on new project Intel GMA500 'Poulsbo' and provide any help.

Common problems

X doesn't start

Double check that the psb kernel module can be loaded into the running kernel by running modprobe psb.

3D Graphics (OpenGL) does not work after suspend and resume

This is a known bug with psb kernel driver. Due to partial close nature of the driver, because Intel has not released an open source driver, the bug fix is currently no available. There are reports2 that a new driver will be available shortly.

Additional Reading

Why GMA 500 hardware doesn't work out of the box? Read "Blaming Intel for how the world is" by Henry Kingman

Other problems?

If you're still having problems, please mail ubuntu-mobile@lists.ubuntu.com, and do not submit bug reports.

  1. Refers to Hardware-Accelerated playback using vaapi, that is, libva library http://en.wikipedia.org/wiki/Intel_GMA#GMA_500_on_Linux (1)

  2. http://www.phoronix.com/scan.php?page=news_item&px=NzY2Mg (2)